Front Door, Sorted
A mounted, connected doorbell camera with confirmed Wi-Fi and working app alerts at your front door.
What Goes Wrong
A doorbell camera that mounts in minutes can still fail on power, angle, or connectivity, here is where rushed installs fall short.
A wired doorbell camera needs 16 to 24 volts AC; an old or undersized transformer causes constant reboot cycles and dropped video.
The installer tests transformer output before mounting anything, swapping it out if the reading falls outside the camera’s required range.
Mounting at door height without adjusting the bracket cuts off the walkway and misses faces, leaving packages and visitors outside the frame.
The bracket angle is set to capture the face, the step, and the walkway, then verified live in the app before the installer moves on.
A doorbell camera mounted at the front entry can sit at the edge of your router’s range, causing dropped connections and missed motion alerts.
Wi-Fi strength is tested at the exact mounting point before pairing, so connectivity issues are caught and resolved during the visit.
Screwing directly into brick or stucco without pilot holes and anchors leaves the bracket loose, and the camera shifts angle over time.
On brick or stucco facades, the installer drills pilot holes and sets anchors before the bracket goes on, keeping the camera fixed and level.
What’s Included
From the first wiring check to confirmed app access, here is the full scope of the work.
Connects to your existing doorbell wires and transformer, with a voltage check and chime compatibility confirmed before mounting.
Mounts without any existing wiring, using a battery pack and wireless chime unit, the practical route for older Houston homes with no doorbell circuit.
Pilot holes, anchors, and a leveled bracket on hard facades common across Houston’s older neighborhoods, so the camera stays fixed and on angle.
Full Wi-Fi pairing, motion zone configuration, and a live ring test so alerts reach your phone before the installer leaves.
Old transformer replaced if voltage is out of spec.
Plug-in chime added when no existing chime is wired.
Signal strength tested at the mounting point.
Live view confirmed in the app before job closes.
Why Choose Us
Accountability and process details that matter when the job involves your home’s entry point.
You receive an itemized quote listing every component and its cost before the visit is booked.
We arrange installers familiar with battery-powered setups, so older homes without a doorbell circuit are not a problem.
The installer does not leave until a ring test passes and motion alerts reach your phone, confirmed, not assumed.
After the visit, we check that the camera streams and alerts report correctly, catching any issue before it becomes a problem.
Before leaving, the installer demonstrates the app, motion zones, and how to review recorded footage on your device.
The Process
01
Share your property details and we arrange a local installer to visit, assess your wiring, and provide a written itemized quote.
02
The installer handles drilling, mounting, power setup, and full app pairing on the day of the visit at your front door.
03
A live ring test and app notification check confirm everything works before the installer leaves and we follow up afterward.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Video doorbell install | $150-$300 |
| Video doorbell replace or retrofit | $200-$400 |
Send us your details and we’ll arrange a local installer to visit, assess your wiring, and provide a free written estimate, components and price listed before anything is booked.